--> Product :: SAMHWA ENG
인기 검색어
Whatever customer seeks for,
Samhwa DSP is able to meet it
Product
DSP-SDTR-P:Socket-Pin Type Digital Shut Down Turn-over Relay
Digital Shut Down Turn-over Relay
Main Feature
  •  DSP-SDTR :Shut Down Turn-over Relay
  • Socket-Pin Insatallation Type
  • Compact size, Complete Digital Type based on MCU    
  •  Just restart execution under instant power-off and voltage drop(Sag) 
  •  3 Wire Easy Connection : not concerend with ON-OFF  Switch Position     
    •  Possible to prest numerical operation time :3 Digit Window     
    • Shut down delay time/S-t
    • Delay on make time/d-t 
  • Applied benift
    • Just one model charges its job wothout concerning with ON-OFF switch position
    • Correct response for voltage drop, Zero Voltage
    • Neccessary minimum voltage duration time : 25ms or more
  • Critical Note
    • The contact of "ON" switch state must be self-holding by auxiliary output of the contactor
    • This relay needs to wait for 3 minitue at least under no-voltage state to change sequence control voltage
    • In case the sequence control power is on , then at first “v***”(version) is shown and nextly “actual voltage” is appeared. This means this relay has completed to remember a system voltage as a reference voltage, consequently this relay works after 1 min from an appearance of actual voltage
    • Once this relay remembers a reference voltage to be basis for an instant power-off state,then this reference voltage is indicated in motor stop state
    • Self-diagnostic test : press “CLR” key foe 3 sec or more in motor running state,then “tESt” is flickerd 3 times and and execute restarting once ” as showing “RUN” after “dt → “rUn”means that the restart is done
    • In order to reestablish a reference voltage, press both “UP” and “DN” key,then release them when “oPSEt” is shown
    • The minimum sustained time of the system voltage signal in order for this relay to do its job shall be 25mS or more
Technical Specification
  •  Shut down delay time(SDDT):0(Instant)~10 sec
  •  Delay on make time(DOMT):1~30/60 sec
  •  trip output :1a,3A/Resistive
  •  Application environment/temperature
  • operation/-20°C~60°C
  • Storage/ -30°C~80 °C
  • Humidity/30~85%,Relative/Non-condensing
  •  Time torrerence:±10%
  •  Insulation/case-Circuit: 10MOhm or more,/500VDC
  •  High voltage insulation:Case-Circuit/ 2KV,50/60Hz,1 min
  •  Contact-Contact:1KV,50/60Hz, 1 min
  •  Control power: 85~260VAC,50/60Hz(120~370VDC)
  •  Consuming power : 2VA/max
  •  Installation: 35mm DIN Rail,Panel Mounting
Catalog
  • CATEGORY
  • SUBJECT
  • DOWNLOAD
  • MODIFY DATE
Cad
  • CATEGORY
  • SUBJECT
  • DOWNLOAD
  • MODIFY DATE
Certification
Ordercode
  • DSP-SDTR.png
Other Series